Specifications

Slew Given Number of Dot
Rows
The ^PF (Slew Given Number of Dot Rows) instruction causes the
printer to slew labels (move labels at a high speed without printing) a
specified number of dot rows, at the bottom of the label. This allows
faster printing when the bottom portion of a label is blank.
The format for the ^PF instruction is:
^PF#
where
^PF = Slew a Number of Dot Rows
# = Number of Dot Rows to Slew
Default value: None. Instruction is ignored if no value, or
incorrect value is specified.
Acceptable values: Minimum=0, Maximum=9999
Slew to Home Position
The ~PH or ^PH (Slew to Home Position) instruction causes the
printer to feed one blank label.
The ~PH instruction feeds one label after the format currently being
printing is done or when the printer is placed in pause.
The ^PH instruction feeds one blank label after the format it is in
prints.
300 ZPL II COMMAND REFERENCE
^PH
~PH
^PF