Specifications

Configuration Update
The ^JU (Configuration Update) instruction sets the active configura-
tion for the printer.
There are three choices for this instruction. They are defined as
follows:
S = Save Current Settings
The current configuration will be saved. This is the configuration
that will be used at Power-On.
F = Reload Factory Values (Default)
The factory values (default values) will be loaded.
(These values will be lost at Power Off if they are not saved with
the ^JUS instruction.)
R = Recall Last Saved Values
The last values saved using this (^JU) instruction or the Mode
Sequencing from the front panel will be loaded.
Set ZPL
The ^SZ (Set ZPL) instruction is used to select the programming lan-
guage used by the printer. This instruction gives you the ability to
print labels formatted in both ZPL or ZPL II.
This instruction will remain active until another ^SZ instruction is
sent to the printer or the printer is turned off.
Setting Up Customized Configuration Formats
You can save a great deal of time by setting up your own configura-
tion formats. If most of your printing is done on one or two types of
media, you can easily create label formats specifically for those
media.
If you need to print a special label, you change the various instruc-
tions and then you only need to change the media and load the new,
specific configuration format.
28 CHAPTER 3
ZPL II Printer Configuration