Reference Guide

User Preferences
131
Transmit Code ID Character (continued)
Prefix/Suffix Values
Key Category Parameter # P = 99, S1 = 98, S2 = 100 (SSI # P = 63h, S1 = 62h, S2
= 64h)
Decimal Value Parameter # P = 105, S1 = 104, S2 = 106 (SSI # P = 69h, S1 = 68h,
S2 = 6Ah)
You can append a prefix and/or one or two suffixes to scan data for use in data editing. To set a value for a
prefix or suffix, scan a four-digit number (i.e., four barcodes from <em_Emphasis><bl_blue>Appendix G,
Numeric Barcodes) that corresponds to that value. See<em_Emphasis><bl_blue>Appendix I, ASCII
Character Sets for the four-digit codes.
When using host commands to set the prefix or suffix, set the key category parameter to 1, then set the
3-digit decimal value. See <em_Emphasis><bl_blue>Appendix I, ASCII Character Sets for the four-digit
codes.
The default prefix and suffix value is 7013 <CR><LF> (the Enter key). To correct an error or change a
selection, scan <bl_blue><em_Emphasis>Cancel on page H-1
.
Symbol Code ID Character
(2)
AIM Code ID Character
(1)
*None
(0)
note To use Prefix/Suffix values, first set the <bl_blue><em_Emphasis>Scan Data Transmission Format on
page 10-132
.
guide-user-color-8.5x11.book Page 131 Monday, June 1, 2020 5:43 PM
Draft v 10