Reference Guide

Table Of Contents
User Preferences
136
Unsolicited Heartbeat Interval
Parameter # 1118 (SSI #
F8h 04h 5Eh)
The imager supports sending Unsolicited Heartbeat Messages to assist in diagnostics. To enable this
feature and set the desired unsolicited heartbeat interval, scan one of the time interval barcodes below, or
scan Set Another Interval followed by four numeric barcodes from <em_Emphasis><bl_blue>Appendix
G, Numeric Barcodes (scan sequential numbers that correspond to the desired number of seconds).
Scan Disable Unsolicited Heartbeat Interval to turn off the feature.
The heartbeat event is sent as decode data (with no decode beep) in the form of:
MOTEVTHB:nnn
where nnn is a three-digit sequence number starting at 001 and wrapping after 100.
10 seconds
(10)
1 minute
(60)
Set Another Interval
*Disable Unsolicited Heartbeat Interval
(0)
guide-user-color-8.5x11.book Page 136 Monday, June 1, 2020 5:43 PM
Draft v 10