Reference Guide
Table Of Contents
- Contents
- About This Document
- Getting Started
- 123Scan and Software Tools
- Data Capture
- Maintenance, Troubleshooting, and Technical Specifications
- Radio Communications
- Introduction
- Setting Parameters
- Radio Communications Parameter Defaults
- Wireless Beeper Definitions
- Radio Communication Host Types
- Bluetooth Friendly Name
- Wi-Fi Friendly Mode
- Wi-Fi Friendly Channel Exclusion (continued)
- Radio Output Power
- Bluetooth Radio State
- HID Host Parameters
- Auto-Reconnect Feature
- Out of Range Indicator
- Beep on Insertion
- Digital Scanner(s) To Cradle Support
- Batch Mode
- Persistent Batch Storage
- Page Button
- Page Options
- Cradle Bluetooth Operation Mode
- Bluetooth Security
- Bluetooth Radio, Linking, and Batch Operation
- User Preferences
- Introduction
- Scanning Sequence Examples
- Errors While Scanning
- User Preferences Parameter Defaults
- Parameters
- Default Parameters
- Parameter Barcode Scanning
- Beep After Good Decode
- Beep on
- Direct Decode Indicator
- Beeper Volume
- Beeper Tone
- Beeper Duration
- Suppress Power Up Beeps
- Decode Pager Motor
- Decode Pager Motor Duration
- Night Mode (CS6080-HC Only)
- Haptic Feedback (Vibrate) on Button Touch
- Click on Button Touch
- Lamp Mode
- Low Power Mode
- Time Delay to Low Power Mode
- Timeout to Low Power Mode from Auto Aim
- Battery Preservation Mode
- Hand-Held Trigger Mode
- Hands-Free Mode
- Hand-Held Decode Aiming Pattern
- Hands-Free Decode Aiming Pattern
- Picklist Mode
- FIPS Mode
- Continuous Barcode Read
- Unique Barcode Reporting
- Decode Session Timeout
- Hands-free Decode Session Timeout
- Timeout Between Decodes, Same Symbol
- Timeout Between Decodes, Different Symbols
- Triggered Timeout, Same Symbol
- Decode Mirror Images (Data Matrix Only)
- Mobile Phone/Display Mode
- PDF Prioritization
- PDF Prioritization Timeout
- Presentation Mode Field of View
- Decoding Illumination
- Illumination Brightness
- Motion Tolerance (Hand-Held Trigger Modes Only)
- Add an Enter Key
- Transmit Code ID Character
- Prefix/Suffix Values
- Scan Data Transmission Format
- FN1 Substitution Values
- Transmit “No Read” Message
- Unsolicited Heartbeat Interval
- securPharm Decoding
- securPharm Output Formatting
- Programmable Button for Single Press
- Imaging Preferences
- Introduction
- Scanning Sequence Examples
- Errors While Scanning
- Imaging Preferences Parameter Defaults
- Imaging Preferences
- Operational Modes
- Image Capture Illumination
- Image Capture Autoexposure
- Fixed Exposure
- Fixed Gain
- Gain/Exposure Priority for Snapshot Mode
- Snapshot Mode Timeout
- Snapshot Aiming Pattern
- Silence Operational Mode Changes
- Image Cropping
- Crop to Pixel Addresses
- Image Size (Number of Pixels)
- Image Brightness (Target White)
- JPEG Image Options
- JPEG Target File Size
- JPEG Quality and Size Value
- Image Enhancement
- Image File Format Selector
- Image Rotation
- Bits Per Pixel
- Signature Capture
- Signature Capture File Format Selector
- Signature Capture Bits Per Pixel
- Signature Capture Width
- Signature Capture Height
- Signature Capture JPEG Quality
- Video View Finder (Corded Mode Only)
- Video View Finder Image Size
- USB Interface
- Introduction
- Connecting a USB Interface
- USB Parameter Defaults
- USB Host Parameters
- USB Device Type
- Symbol Native API (SNAPI) Status Handshaking
- USB Keystroke Delay
- USB CAPS Lock Override
- USB Ignore Unknown Characters
- USB Convert Unknown to Code 39
- Emulate Keypad
- Emulate Keypad with Leading Zero
- Quick Keypad Emulation
- USB Keyboard FN 1 Substitution
- Function Key Mapping
- Simulated Caps Lock
- Convert Case
- USB Static CDC
- Optional USB Parameters
- ASCII Character Sets for USB
- SSI Interface
- Symbologies
- Introduction
- Scanning Sequence Examples
- Errors While Scanning
- Symbology Parameter Defaults
- Enable/Disable All Code Types
- UPC/EAN
- Enable/Disable UPC-A
- Enable/Disable UPC-E
- Enable/Disable UPC-E1
- Enable/Disable EAN-8/JAN-8
- Enable/Disable EAN-13/JAN-13
- Enable/Disable Bookland EAN
- Decode UPC/EAN/JAN Supplementals
- User-Programmable Supplementals
- UPC/EAN/JAN Supplemental Redundancy
- UPC/EAN/JAN Supplemental AIM ID Format
- UPC Reduced Quiet Zone
- Transmit UPC-A Check Digit
- Transmit UPC-E Check Digit
- Transmit UPC-E1 Check Digit
- UPC-A Preamble
- UPC-E Preamble
- UPC-E1 Preamble
- Convert UPC-E to UPC-A
- Convert UPC-E1 to UPC-A
- EAN-8/JAN-8 Extend
- Bookland ISBN Format
- UCC Coupon Extended Code
- Coupon Report
- ISSN EAN
- Code 128
- Code 39
- Code 93
- Code 11
- Interleaved 2 of 5 (ITF)
- Discrete 2 of 5 (DTF)
- Codabar (NW - 7)
- MSI
- Chinese 2 of 5
- Matrix 2 of 5
- Korean 3 of 5
- Inverse 1D
- GS1 DataBar
- Composite
- 2D Symbologies
- Postal Codes
- Symbology-Specific Security Levels
- Report Version
- Macro PDF Features
- Digimarc Barcode
- Data Formatting: ADF, MDF, Preferred Symbol
- OCR Programming
- Driver’s License Set Up
- Standard Parameter Defaults
- Country Codes
- Country Code Pages
- CKJ Decode Control
- Programming Reference
- Sample Barcodes
- Numeric Barcodes
- Alphanumeric Barcodes
- ASCII Character Sets
- Communication Protocol Functionality
- Signature Capture Code
- Non-Parameter Attributes
- Scan Speed Analytics
- Upgrading Over Bluetooth Without A Cradle
- Index
Radio Communications
54
Wi-Fi Friendly Mode
Scanners configured for Wi-Fi friendly mode behave as follows:
• The scanner remains in sniff mode, and exits sniff mode only during firmware update.
• If any Wi-Fi channel is excluded from the hopping sequence, AFH turns off.
• Scanner (and cradle) avoid the selected Wi-Fi channels after establishing connection.
Notes
• If using this feature, configure all scanners in the area for Wi-Fi friendly mode.
• By default, no Wi-Fi channels are excluded.
• Since Bluetooth requires a minimum of 20 channels when Wi-Fi channels 1, 6, and 11 are excluded,
a smaller number of channels are cut from the hopping sequence.
• Updating Wi-Fi friendly settings before Bluetooth connection is recommended.
Scan a barcode below to enable or disable Wi-Fi Friendly Mode, then see
<bl_blue><em_Emphasis>Wi-Fi Friendly Channel Exclusion to select any channels to exclude.
Wi-Fi Friendly Channel Exclusion
Wi-Fi Channel Exclusion
Select the channels to exclude:
• Exclude Wi-Fi channel 1: Bluetooth channels 0-21 are excluded from hopping sequence
(2402-2423 MHz).
• Exclude Wi-Fi channel 6: Bluetooth channels 25-46 are excluded from hopping sequence
(2427 - 2448 MHz).
• Exclude Wi-Fi channel 11: Bluetooth channels 50-71 are excluded from hopping sequence
(2452 - 2473 MHz).
• Exclude Wi-Fi channel 1, 6 and 11: Bluetooth channels 2-19 (2404-2421 MHz),
26-45 (2428 - 2447 MHz) and 51-69 (2453 - 2471 MHz) are excluded from hopping sequence.
• Exclude Wi-Fi channels 1 and 6: Bluetooth channels 0-21 (2402-2423 MHz) and 25-46
(2427 - 2448 MHz) are excluded from hopping sequence.
• Exclude Wi-Fi channels 1 and 11: Bluetooth channels 0-21 (2402-2423 MHz) and 50-71
(2452 - 2473 MHz) are excluded from hopping sequence.
• Exclude Wi-Fi channel 6 and 11: Bluetooth channels 25-46 (2427 - 2448 MHz) and 50-71
(2452 - 2473 MHz) are excluded from hopping sequence.
*Disable Wi-Fi Friendly Mode
Enable Wi-Fi Friendly Mode
guide-user-color-8.5x11.book Page 54 Monday, June 1, 2020 5:43 PM
Draft v 10