Reference Guide

142
Imaging Preferences
Introduction
You can program the digital scanner to perform various functions, or activate different features. This
chapter describes imaging preference features and provides programming barcodes for selecting these
features.
The digital scanner ships with the settings in <bl_blue><em_Emphasis>Imaging Preferences Parameter
Defaults on page 11-143 (also see <em_Emphasis><bl_blue>Appendix A, Standard Parameter Defaults
for all host device and miscellaneous defaults). If the default values suit requirements, programming is not
necessary.
To set feature values, scan a single barcode or a short barcode sequence. The settings are stored in
non-volatile memory and are preserved even when you power down the digital scanner.
To return all features to default values, scan the <bl_blue><em_Emphasis>Set Factory Defaults on page
6-5. Throughout the programming barcode menus, asterisks (
*) indicate default values.
note Only the Symbol Native API (SNAPI) with Imaging interface supports image capture. See
<bl_blue><em_Emphasis>USB Device Type on page 8-4 to enable this host.
note Most computer monitors allow scanning the barcodes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the barcode clearly, and
bars and/or spaces are not merging.
Feature/Option
* Indicates Default
*Enable Image Capture Illumination
(2)
Option Value
guide-user-color-8.5x11.book Page 142 Monday, June 1, 2020 5:43 PM
Draft v 10