Reference Guide
Table Of Contents
- Contents
- About This Document
- Getting Started
- 123Scan and Software Tools
- Data Capture
- Maintenance, Troubleshooting, and Technical Specifications
- Radio Communications
- Introduction
- Setting Parameters
- Radio Communications Parameter Defaults
- Wireless Beeper Definitions
- Radio Communication Host Types
- Bluetooth Friendly Name
- Wi-Fi Friendly Mode
- Wi-Fi Friendly Channel Exclusion (continued)
- Radio Output Power
- Bluetooth Radio State
- HID Host Parameters
- Auto-Reconnect Feature
- Out of Range Indicator
- Beep on Insertion
- Digital Scanner(s) To Cradle Support
- Batch Mode
- Persistent Batch Storage
- Page Button
- Page Options
- Cradle Bluetooth Operation Mode
- Bluetooth Security
- Bluetooth Radio, Linking, and Batch Operation
- User Preferences
- Introduction
- Scanning Sequence Examples
- Errors While Scanning
- User Preferences Parameter Defaults
- Parameters
- Default Parameters
- Parameter Barcode Scanning
- Beep After Good Decode
- Beep on
- Direct Decode Indicator
- Beeper Volume
- Beeper Tone
- Beeper Duration
- Suppress Power Up Beeps
- Decode Pager Motor
- Decode Pager Motor Duration
- Night Mode (CS6080-HC Only)
- Haptic Feedback (Vibrate) on Button Touch
- Click on Button Touch
- Lamp Mode
- Low Power Mode
- Time Delay to Low Power Mode
- Timeout to Low Power Mode from Auto Aim
- Battery Preservation Mode
- Hand-Held Trigger Mode
- Hands-Free Mode
- Hand-Held Decode Aiming Pattern
- Hands-Free Decode Aiming Pattern
- Picklist Mode
- FIPS Mode
- Continuous Barcode Read
- Unique Barcode Reporting
- Decode Session Timeout
- Hands-free Decode Session Timeout
- Timeout Between Decodes, Same Symbol
- Timeout Between Decodes, Different Symbols
- Triggered Timeout, Same Symbol
- Decode Mirror Images (Data Matrix Only)
- Mobile Phone/Display Mode
- PDF Prioritization
- PDF Prioritization Timeout
- Presentation Mode Field of View
- Decoding Illumination
- Illumination Brightness
- Motion Tolerance (Hand-Held Trigger Modes Only)
- Add an Enter Key
- Transmit Code ID Character
- Prefix/Suffix Values
- Scan Data Transmission Format
- FN1 Substitution Values
- Transmit “No Read” Message
- Unsolicited Heartbeat Interval
- securPharm Decoding
- securPharm Output Formatting
- Programmable Button for Single Press
- Imaging Preferences
- Introduction
- Scanning Sequence Examples
- Errors While Scanning
- Imaging Preferences Parameter Defaults
- Imaging Preferences
- Operational Modes
- Image Capture Illumination
- Image Capture Autoexposure
- Fixed Exposure
- Fixed Gain
- Gain/Exposure Priority for Snapshot Mode
- Snapshot Mode Timeout
- Snapshot Aiming Pattern
- Silence Operational Mode Changes
- Image Cropping
- Crop to Pixel Addresses
- Image Size (Number of Pixels)
- Image Brightness (Target White)
- JPEG Image Options
- JPEG Target File Size
- JPEG Quality and Size Value
- Image Enhancement
- Image File Format Selector
- Image Rotation
- Bits Per Pixel
- Signature Capture
- Signature Capture File Format Selector
- Signature Capture Bits Per Pixel
- Signature Capture Width
- Signature Capture Height
- Signature Capture JPEG Quality
- Video View Finder (Corded Mode Only)
- Video View Finder Image Size
- USB Interface
- Introduction
- Connecting a USB Interface
- USB Parameter Defaults
- USB Host Parameters
- USB Device Type
- Symbol Native API (SNAPI) Status Handshaking
- USB Keystroke Delay
- USB CAPS Lock Override
- USB Ignore Unknown Characters
- USB Convert Unknown to Code 39
- Emulate Keypad
- Emulate Keypad with Leading Zero
- Quick Keypad Emulation
- USB Keyboard FN 1 Substitution
- Function Key Mapping
- Simulated Caps Lock
- Convert Case
- USB Static CDC
- Optional USB Parameters
- ASCII Character Sets for USB
- SSI Interface
- Symbologies
- Introduction
- Scanning Sequence Examples
- Errors While Scanning
- Symbology Parameter Defaults
- Enable/Disable All Code Types
- UPC/EAN
- Enable/Disable UPC-A
- Enable/Disable UPC-E
- Enable/Disable UPC-E1
- Enable/Disable EAN-8/JAN-8
- Enable/Disable EAN-13/JAN-13
- Enable/Disable Bookland EAN
- Decode UPC/EAN/JAN Supplementals
- User-Programmable Supplementals
- UPC/EAN/JAN Supplemental Redundancy
- UPC/EAN/JAN Supplemental AIM ID Format
- UPC Reduced Quiet Zone
- Transmit UPC-A Check Digit
- Transmit UPC-E Check Digit
- Transmit UPC-E1 Check Digit
- UPC-A Preamble
- UPC-E Preamble
- UPC-E1 Preamble
- Convert UPC-E to UPC-A
- Convert UPC-E1 to UPC-A
- EAN-8/JAN-8 Extend
- Bookland ISBN Format
- UCC Coupon Extended Code
- Coupon Report
- ISSN EAN
- Code 128
- Code 39
- Code 93
- Code 11
- Interleaved 2 of 5 (ITF)
- Discrete 2 of 5 (DTF)
- Codabar (NW - 7)
- MSI
- Chinese 2 of 5
- Matrix 2 of 5
- Korean 3 of 5
- Inverse 1D
- GS1 DataBar
- Composite
- 2D Symbologies
- Postal Codes
- Symbology-Specific Security Levels
- Report Version
- Macro PDF Features
- Digimarc Barcode
- Data Formatting: ADF, MDF, Preferred Symbol
- OCR Programming
- Driver’s License Set Up
- Standard Parameter Defaults
- Country Codes
- Country Code Pages
- CKJ Decode Control
- Programming Reference
- Sample Barcodes
- Numeric Barcodes
- Alphanumeric Barcodes
- ASCII Character Sets
- Communication Protocol Functionality
- Signature Capture Code
- Non-Parameter Attributes
- Scan Speed Analytics
- Upgrading Over Bluetooth Without A Cradle
- Index
About This Document
24
• Country Code Pages provides barcodes for selecting code pages for the country keyboard type.
• CKJ Decode Control describes control parameters for Unicode/CJK (Chinese, Japanese, Korean)
barcode decode through USB HID Keyboard Emulation mode.
• Programming Reference provides a table of AIM code identifiers, ASCII character conversions, and
keyboard maps.
• Sample Barcodes includes sample barcodes of various code types.
• Numeric Barcodes includes the numeric barcodes to scan for parameters requiring specific numeric
values.
• Alphanumeric Barcodes includes the alphanumeric barcodes to scan for parameters requiring specific
alphanumeric values.
• ASCII Character Sets provides ASCII character value tables.
• Communication Protocol Functionality lists supported scanner functionality by communication protocol.
• Signature Capture Code describes CapCode, a special pattern that encloses a signature area on a
document and allows the scanner to capture a signature.
• Non-Parameter Attributes defines non-parameter attributes.
• Scan Speed Analytics describes the Zebra ScanSpeed Analytics software that allows the identification
of barcodes that slow down processes.
• Upgrading Over Bluetooth Without A Cradle provides information about performing upgrades on the
scanner without a cradle, using 123Scan.
Notational Conventions
The following conventions are used in this document:
• Bold text is used to highlight the following:
• Dialog box, window and screen names
• Drop-down list and list box names
• Check box and radio button names
• Icons on a screen
• Key names on a keypad
• Button names on a screen.
• Bullets (•) indicate:
• Action items
• Lists of alternatives
• Lists of required steps that are not necessarily sequential.
• Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.
• Throughout the programming barcode menus, asterisks (
*) are used to denote default parameter
settings.
*Baud Rate 9600
Feature/Option
* Indicates Default
guide-user-color-8.5x11.book Page 24 Monday, June 1, 2020 5:43 PM
Draft v 10