Instructions

Getting Started 1 - 21
iPad Pairing Example
For CS3070 scanners, to pair to an iPad:
1. Press the scan button (+) to wake the scanner.
2. Press and hold the Bluetooth button (round button with logo) for five seconds. The scanner beeps and the
Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the host.
3. On the iPad, tap the Settings icon.
4. Tap General from the list of options that appears.
Figure 1-29 General Menu
5. Tap Bluetooth. If Bluetooth is not enabled, swipe to enable it. The CS3070 appears in the Devices list,
indicated by its model name and serial number.
Figure 1-30 Bluetooth Devices
NOTE HID is the default profile for the CS3070. If this was changed, scan Bluetooth HID Profile on page 3-13.