EM 220 Mobile Printer User's Manual P1007752-001 Rev. 1.
EM 220 Table of Contents ※ Manual Information & Usage Precautions············································· 7 1. Content Confirmation ············································································· 14 2. Product Part Names················································································ 15 3.
EM 220 ■ Proprietary Statements This manual contains proprietary information of Zebra Technologies Corporation. It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the expressed written permission of Zebra Technologies Corporation.
EM 220 Canadian Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada. “IC:” before the equipment certification number signifies that the Industry Canada technical specifications were met. It does not guarantee that the certified product will operate to the user’s satisfaction.
EM 220 Copyrights The copyrights in this manual and the label print engine described therein are owned by Zebra Technologies Corporation. Unauthorized reproduction of this manual or the software in the label print engine may result in imprisonment of up to one year and fines of up to $10,000 (17 U.S.C.506). Copyright violators may be subject to civil liability. This product may contain ZPL®, ZPL II®, and ZebraLinktm programs; Element Energy Equalizer® Circuit; E3®; and AGFA fonts. Software © ZIH Corp.
EM 220 ■ Introduction to the EM Series Thank you for choosing the EM 220 Mobile Printer. Zebra’s ultra-small EM 220 mobile printer delivers convenient receipt printing wherever you need it. The EM 220 combines optional Bluetooth® 2.0 wireless connectivity and magnetic card reader with straightforward operation for simple mobile receipt printing and credit card transactions. This user’s guide gives you the information you will need to operate the EM 220 series printer.
EM 220 ■ Manual Information ※ Manual Information & Usage Precautions This user’s manual contains basic information for product usage as well as for emergency measures that may be required when using the EM 220 printer. ※ For additional information on the EM 220, please refer to the following supplemental manuals: 1. Windows CE Module Program Manual This manual provides information on the dll files required for Windows CE application program development. 2.
EM 220 ■ Safety Precautions When using the EM 220 printer, please follow the recommended safety regulations provided below. Warning Violating the following instructions may cause serious injury. 1. Do not plug several products in one multi-outlet; this can provoke over-heating and a fire. • If the plug is wet or dirty, wipe it before usage. • If the plug does not fit perfectly with the outlet, do not force it in. • Be sure to use only standard multi-plug outlets. 2. You must use only the supplied adapter.
EM 220 Caution Violating the following instructions may cause injury to the user or damage the printer. 1. If you observe smoke, odor or noise from the printer, unplug it before taking the following measures: • Turn off the printer and unplug the unit from the electrical outlet. • Contact an authorized Zebra Technologies service provider for repair. 2. Keep the packet of desiccant material (silica gel) out of children’s reach. 3.
EM 220 ■ Battery Safety Precautions Make sure you review the user manual carefully prior to product use. Neglecting to follow the instructions may result in overheating of the battery, combustion, explosion, damage and/or decline in performance and product life. Danger 1. Do not allow liquids to enter or leak into the battery interior.
EM 220 9. Do not pierce the battery with a sharp object, or hit it with a heavy object. Avoid accidental short circuiting of any battery. Allowing battery terminals to contact conductive material will create a short circuit which could cause burns and other injuries or could start a fire. The battery may rupture or become warped, causing short circuits that may result in battery overheating, combustion, and/or explosion. 10. Do not solder the battery directly.
EM 220 Caution 1. Do not use or leave the battery in a location exposed to high temperatures or intense direct sunlight. Doing so can cause battery overheating and/or combustion. In addition, battery performance and product life may be reduced. 2. The battery contains a safety mechanism to prevent danger. Do not use the battery in a location that is prone to static electricity (above the amount covered by the manufacturer’s product warranty).
EM 220 Recommended 1. Review the user manual for instructions regarding insertion and removal of the battery from the printer. 2. The battery ships partially charged. You must charge the battery fully before using the printer for the first time. To charge the battery, use the exclusive charger provided with your printer. 3. To avoid improper use of the battery, review the product user manual carefully. 4. Do not charge the battery beyond the normal charging time indicated in the user manual. 5.
EM 220 1. Content Confirmation Contact the dealer from which the purchase was made if any item is damaged and/or missing. EM 220 Power Cord Paper Battery Battery Charger Belt Strap Cleaning Pen CD User Manual ※ Optional items Battery Holder Interface Cable EM Series Quad Charger Rev. 1.
EM 220 2. Product Part Names • Front Paper Cover Power Button Paper Feed Button Open Button MSR Cover BT Cap (Bluetooth Download Connector) • Rear Belt Strap Hole Battery Interface Cap Cable Connection Power Connection Rev. 1.
EM 220 3. Installation & Usage 3-1 Battery Installation 1) Insert the battery on the rear side of the printer, aligning the battery hook properly. 2) Push the battery into the slot until a snapping sound is heard. NOTE As the battery is not charged at the time of purchase, charge the battery prior to product use. (Use the battery charger and/or the optional battery holder.) 3-2 Battery Charging 3-2-1 Battery Charging Usage ③ ① 1) Turn off the printer power.
EM 220 3-2-3 EM Series Quad Charger (Optional) Usage 3-2-3-1 Connecting the cables 1) Connect the power cord to the adaptor, and Connect the adaptor to the power connector of the Quad Charger. 2) Plug the power cord into a power Outlet. Input power is 100 ~ 250VAC, 50/60Hz, 1.4A. 3) When power is supplied, the green LED turns on for two seconds. CAUTION If the red LED turns on for two seconds, it may indicate a battery-charging problem. Please consult the reseller.
EM 220 3-2-3-2 Battery Charging 1) Fasten batteries via the battery hooks into the Quad Charger as shown above. 2) Push the battery in until a snapping sound is emitted. 3) Charging begins as soon as the battery is completely inserted. Batteries are charged to 8.4VDC, 0.8A. 4) Push the hook and pull up to extract the battery. NOTE Battery charging status descriptions are as follows.
EM 220 3-3 Paper Installation 1) Press the Open button to open the paper cover. 2) Insert the paper as shown in the image. (Remove any remaining core of a fully used paper roll.) 3) Ensure that you align the paper correctly. 4) Pull the paper out as shown in the image and close the paper cover. 5) Tear off any excess paper in the direction of the side of the printer. Rev. 1.
EM 220 3-4 Belt Strap Usage Belt Strap 1) Insert the belt strap screw into the belt strap hole. 2) Use a coin to tighten the belt strap screw as shown in the image. Coin Belt 3) Undo the belt strap Velcro. 4) Fasten the belt strap to a belt. 5) Close the Velcro as shown in the image. Belt Rev. 1.
EM 220 3-5 Leather Case (Optional) Usage 1) Undo the Velcro. 2) Place the printer into the leather case following the direction shown in the image. 3) Close the Velcro. 4) Affix to a belt using the clip at the rear of the case. Belt NOTE The clip on the leather case can be rotated three stages by 30° per stage (maximum 90°) Rev. 1.
EM 220 3-6 Control Panel Usage • Power Button This button is used to turn the printer on and off. When the printer is off, pressing this button for approximately 2 seconds will turn the power on. When the printer is on, pressing this button for approximately 2 seconds will turn the power off. • Paper Feed Button Paper output can be done manually by pressing this button. In addition, self-testing and Hexadecimal Dumping can be done. 1) Refer to “4. Self-Test” for self-test information.
EM 220 3-7 MSR Usage 1) Press the MSR cover to open. 2) Insert the card as shown in the image and swipe in the direction of the arrow. (can be done in both directions) 3) When finished using, press the MSR cover to close it. NOTE If the card does not register, first check to see if it is properly aligned. When swiping the card, the recommended swiping speed is 100 ~ 1500 mm/sec. 4.
EM 220 • Self-Test Printout Sample Boot loader version : VER v2.01 20071005 Firmware version : B01.00 STD 071108 Bluetooth Firmware version : 3.0.0 Bluetooth BD address : 001901223194 Auth. & Encry.
EM 220 5. Label Printing Function 5-1 Label Function Setting Label paper and black mark paper available at the label mode. • Setting Operations 1) Turn on the printer power. 2) Open the paper cover and press and hold down the paper feed button for longer than two seconds. 3) After the buzzer tone is emitted, insert paper and close the cover. 4) Repeat the steps above to return to receipt mode. • Setting Via Memory Switch - Please refer to the memory switch changing section of the Commands Manual.
EM 220 6. Peripherals Connection This product can communicate with other devices via Bluetooth communication and cable. 6-1 Bluetooth Connection 1) The printer can be connected to devices equipped with Bluetooth communication capacity (PDAs, PCs, etc.). 2) Use the Bluetooth connection function supported by the device to connect to the printer. NOTE Refer to the Bluetooth Manual for more details on connection.
EM 220 7. Printer Cleaning If the interior of the printer is dusty, print quality can decline. In such a case, follow the instructions below to clean the printer. CAUTION • Make sure to turn the printer power off prior to cleaning. • The print head gets very hot during printing. Before cleaning the print head, turn the printer power off and wait approximately 10 minute before commencement. • When cleaning the print head, do not to touch the heated portion of the print head.
EM 220 8. Appendix 8-1 Specifications NOTE Printer specifications are subject to change without notice.
EM 220 8-2 Certification 1) EMC & Safety Standards • Europe: CE Mark: CE 0984, DEMKO GS: EN60950-1: 2001 • North America: FCC rules part 15C • NRTL Safety Approval IEC60950-1:2001 • Safety Standards: CB-scheme: IEC60950-1: 2001 WARNING Use of an unprotected interface cable with this printer conflicts with EMC standards. Users should only use cables approved by Zebra.
www.zebra.com ______________________________________________________________________ Zebra Technologies International, LLC 333 Corporate Woods Parkway Vernon Hills, Illinois 60061, 3109 USA Phone: +1.847.634.6700 Toll-Free: +1.800.423.0422 Fax: +1.847.913.