User`s manual

Command
Concatenation
Most commands can be concatenated together
to print several objects on the same line. Refer to
following for an example command concatena
-
tion.
All objects on a line must be the same size
(height). An exception to this is the printer’s
ability to concatenate a line command that
changes line size after issuing one of the follow-
ing commands: ESCA (Text), ESC{DATA}
(Bar Code) and the ESC |DATA} (Bar Code
with human readable text). While you can con-
catenate other commands on the same line as
the A command which sets line and bar code
height, you can not mix objects of different sizes
on the same line.
To over come this limitation, the R command
can be used to backup the label to print addi
-
tional objects on what seems to be the same
line.
2-6 980353-001 Rev.B
ESC ESC ESC ↵?0 A13 {4014561780}
Selects Bar Code 0 (Code 128)
Selects Character Set 1, width 1, height 3
Print Bar Code with Human Readable
Bar Code Data
Figure 6-1
Concatenated
Commands