User`s manual

FF - Form Feed
Description Use this command to feed to the top of the next
form (label).
When in continuous media mode, the printer
will advance the printer to the next line unless
set to a different value by the N command.
Syntax
E
: ASCII value 12d (0Ch)
: Abbreviation = FF
Parameters None
Default - Label (Gap Sense) Mode:
Go to Top Of (Next) Form.
By Default, Continuous Media Mode:
Go to next line when a Form Feed (FF)
is issued. Line height is set as per the A
command setting.
Continuous Media Mode with N set:
Move the print position from 0 to 99
mm (N00 to N99) for each Form Feed
(FF) issued to the printer. See the N
command for details.
3-16 980353-001 Rev.B