User`s manual

x Command - Bar Width Ratio
Description Use this command to set ratio of the narrow bar
width to the wide bar width for applicable bar
code types.
Supported bar codes that have adjustable bar
with ratios are:
•
Code 39
•
Interleaved 2 of 5
•
CodaBar
Syntax
¬xp
1
p
2
Parameters p
1
= Narrow bar width in dots.
Values: 2, 3 or 4
Default: 2 (.250 mm or .010 inch)
p
2
= Wide bar width in dots.
Values: 04 to 12
Default: 05 (.625 mm or .025 inch)
The selected value will remain in effect until
changed, an error condition occurs, or power is
removed.
Example:
¬x205¿ :sets the narrow bar to 2, and the
:wide bar to 5.
3-38
980353-001 Rev.B