User Manual
Table Of Contents
- Copyright
- Terms of Use
- Revision History
- About This Guide
- Getting Started
- Using the Tablet
- Wireless
- Data Capture
- Expansion Back
- RS507/RS507X Hands-Free Imager
- RS6000 Bluetooth Ring Scanner
- DS3678 Digital Scanner
- Imaging
- Scanning Considerations
- Scanning with the SE4710 Expansion Back
- Scanning with SE4750 Expansion Back
- Scanning with RS507/RS507X Hands-Free Imager
- Scanning with RS6000 Bluetooth Ring Scanner
- Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner
- Pairing Bluetooth Scanners
- Connecting a USB Scanner
- Accessories
- Maintenance and Troubleshooting
- Specifications
- Index
Getting Started
22
To view the Power Pack charge level:
1. Remove the Power Pack from the Expansion Back.
2. Press the Charge Status button. The Charge Status LEDs light to indicate the charge level.
Power Pack is connected to the device and the device is
in the dock changing.
Power Pack is fully discharged.
Power Pack is experiencing charging failure.
Table 6 Power Pack Charge Status Indicators
Power Pack Indicators Description
Charge level is 100%.
Charge level is 80%.
Change level is 60%.
Charge level is 40%.
Charge level is 20%.
Blinking
Charge level is below 20%.
Table 5 Power Pack Status (Continued)
Icon Message Box Description
Charge Status Button
Charge Status LEDs