User Manual
Table Of Contents
- Copyright
- Terms of Use
- Revision History
- About This Guide
- Getting Started
- Using the Tablet
- Wireless
- Data Capture
- Expansion Back
- RS507/RS507X Hands-Free Imager
- RS6000 Bluetooth Ring Scanner
- DS3678 Digital Scanner
- Imaging
- Scanning Considerations
- Scanning with the SE4710 Expansion Back
- Scanning with SE4750 Expansion Back
- Scanning with RS507/RS507X Hands-Free Imager
- Scanning with RS6000 Bluetooth Ring Scanner
- Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner
- Pairing Bluetooth Scanners
- Connecting a USB Scanner
- Accessories
- Maintenance and Troubleshooting
- Specifications
- Index
36
Wireless
This section provides information on the wireless features:
• Wireless Local Area Network (WLAN)
• Bluetooth
• Near Field Communications (NFC).
Wireless Local Area Networks
Wireless local area networks (WLANs) allow the device to communicate wirelessly inside a building that has
the appropriate WLAN infrastructure. Both the infrastructure and the device must both configured properly to
enable this communication.
Once the infrastructure is set up to enforce the chosen WLAN security scheme, use the Wireless & networks
settings to configure the device to match the security scheme.
The device supports the following WLAN security options:
Table 7 WLAN Security Options
Security Type Encryption EAP Method Authentication Method
Open Network None/WEP N/A N/A
WPA2-Personal AES N/A N/A
WPA2-Enterprise AES
Protected EAP (PEAP) Secured password (EAP-MSCHAPv2)
Smart card or other certificate
Smart Card or other Certificate
EAP-TTLS
Unencrypted password (PAP)
CHAP
Microsoft CHAP (MS-CHAP)
Microsoft CHAP v2 (MS-CHAPv2)
802.1X WEP
PEAP Secured password (EAP-MSCHAPv2)
Smart Card or other Certificate
Smart Card or other Certificate
EAP-TTLS
Unencrypted password (PAP)
CHAP
MS-CHAP
MS-CHAPv2