User guide

Zebra GK420t User Guide COBISS System Management
6/18 © IZUM, 18. 3. 2013, VIF-NA-20-EN, V1.0
2. The media roll must go under both media guides.
Figure 11 : Pushing the media under the media guides
3. Place a new ribbon roll on the inner holder. Then, place an empty ribbon core, remained
from the ribbon, on the front holder. Pay attention to lock the notches of the ribbon core
properly. Attach the adhesive strip of the black ribbon cartridge to the empty ribbon core.
Prior to use, pull the ribbon cartridge tight across the printhead.
Figure 12 : Loading black ribbon cartridge
Under media
guides