User guide

13
Loading Roll Media
1/5/2011 GT-Series™ User Guide P1032729-001
3. Pull the media so that it extends out of the front of the printer. Verify the roll turns freely.
The roll must not sit in the bottom of the media compartment. Verify that media’s printing
surface is facing up.
4. Push the media under both of the media guides.
5. Unless you need to load transfer ribbon, close the top cover.
6. If printer power is on, press the Feed Button to feed media. Otherwise, wait to turn on the
printer and complete the printer ‘Getting Started’ instructions in this chapter.