User guide

Loading Transfer Ribbon
22
P1032729-001 GT-Series™ User Guide 1/5/2011
5. Attach the ribbon to the take up core. Use thin strip of tape to secure the ribbon to the take-
up core, if your media does not have an adhesive strip on the ribbon leader like genuine
Zebra
@
ribbon. Align the ribbon so that it will be taken straight onto the core.
6. Turn the ribbon take-up hub with the top moving toward rear to remove slack from the
ribbon. Rotating the hub helps to finish aligning the take up ribbon position with the
supply ribbon roll. The ribbon should be wound, at minimum, one and a half times around
the take-up ribbon core.