Specifications

ZPL Commands
^BY
104
45541L-004 Rev. A ZPL II Programming Guide 9/15/06
Module width and height (w and h) can be changed at anytime with the ^BY command,
regardless of the symbology selected.
Comments Once a
^BY command is entered into a label format, it stays in effect until
another
^BY command is encountered.
Table 11 • Shows module width ratios in dots
12345678910
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
2:1 2:1 2:1 2:1 2:1 2:1 2:1 2:1 2:1 2:1
2:1 2:1 2:1 2:1 2:1 2:1 2:1 2:1 2:1 2.1:1
2:1 2:1 2:1 2:1 2.2:1 2.16:1 2.1:1 2.12:1 2.1:1 2.2:1
2:1 2:1 2.3:1 2.25:1 2.2:1 2.16:1 2.28:1 2.25:1 2.2:1 2.3:1
2:1 2:1 2.3:1 2.25:1 2.4:1 2.3:1 2.28:1 2.37:1 2.3:1 2.4:1
2:1 2.5:1 2.3:1 2.5:1 2.4:1 2.5:1 2.4:1 2.5:1 2.4:1 2.5:1
2:1 2.5:1 2.3:1 2.5:1 2.6:1 2.5:1 2.57:1 2.5:1 2.5:1 2.6:1
2:1 2.5:1 2.6:1 2.5:1 2.6:1 2.6:1 2.57:1 2.65:1 2.6:1 2.7:1
2:1 2.5:1 2.6:1 2.75:1 2.8:1 2.6:1 2.7:1 2.75:1 2.7:1 2.8:1
2:1 2.5:1 2.6:1 2.75:1 2.8:1 2.8:1 2.85:1 2.87:1 2.8:1 2.9:1
3:1 3:1 3:1 3:1 3:1 3:1 3:1 3:1 3:1 3:1
Module Width in Dots (w)
Ratio
Selected
(r)