Specifications

237
ZPL Commands
^NS
9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
^NS
Change Networking Settings
Description The ^NS command is used to change Ethernet network settings.
Format ^NSa,b,c,d
This table identifies the parameters for this format:
Parameters Details
a = network setting
Accepted Values:
IP Resolution.
a = all
b = BOOTP
c = DHCP and BOOTP
d = DHCP
g = gleaning only
r = RARP
p = permanent
b = IP Address
Accepted Values:
0 to 255
c =
Subnet Mask
Accepted Values:
0 to 255
d =
Default Gateway
Accepted Values:
0 to 255