Specifications

287
RFID Commands
Printer and Firmware Compatibility
9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
Printer and Firmware Compatibility
Table 13 shows which RFID ZPL commands you can use with different printers and firmware
versions.
Table 13 • Supported Commands Based on Printer and Firmware
Command Function
UHF Printers HF Printers
R60.13.X
R62.13.X
R63.13.X
SP920X
SP994X,
SP999X,
SP1027X
SP1056X
R110Xi HF
R2844-Z
R110Xi
R170Xi
R110PAX4
R4Mplus
^HL or ~HL
on page 288
Return RFID Data Log to Host * * * * * *
^HR on page 289 Calibrate RFID Transponder
Position
*** * *
*
^RA on page 292 Read AFI or DSFID Byte
*
^RB on page 294 Define EPC Data Structure * * * * *
*
^RE on page 296 Enable/Disable E.A.S. Bit
* *
^RF on page 297 Read or Write RFID Format * * * * *
*
^RI on page 299 Get RFID Tag ID *a *
* *
^RM on page 300 Enable RFID Motion *** * *
*
^RN on page 301 Detect Multiple RFID Tags in
Encoding Field
* b**———
*
~RO on page 302 Reset Advanced Counters * * * * *
*
^RR on page 304 Specify RFID Retries for a
Block
*** * *
*
^RS on page 305 Set Up RFID Parameters * * * * * *
* *
^RT on page 311 Read RFID Tag * c* c* c * * c * c
* c *
~RV on page 313 Report RFID Encoding Results * * *
^RW on page 314 Set RFID Read and Write
Power Levels
*** * *
*
^RZ on page 315 Set RFID Tag Password and
Lock Tag
*** * *
on page 316 Encode AFI or DSFID Byte
*
^WT on page 319 Write (Encode) Tag * d * d * d * * d * d
* d *
^WV on page 321 Verify RFID Encoding
Operation
*** * *
a. Requires R60.13.0.13ZD or higher.
b. Requires R60.13.0.3 or higher.
c. Use the ^RF, ^RM, and ^RR commands rather than the ^RT command. The ^RT command is provided only for backward-compatibility with
label formats that were developed for older Zebra RFID printers.
d. Use the ^RF, ^RM, ^RR, and ^WV commands rather than the ^WT command. The ^WT command is provided only for backward-compatibility
with label formats that were developed for older Zebra RFID printers.