Specifications

13
ZPL Commands
^A
9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
Scalable Font Command
Bitmap Font Command
For reference, see Standard Printer Fonts on page 352, Zebra Code Page 850 on page 342,
Fonts and Bar Codes on page 351, and ASCII on page 347.
Comments Fonts are built using a matrix that defines standard height-to-width ratios. If you
specify only the height or width value, the standard matrix for that font automatically
determines the other value. If the value is not given or a 0 (zero) is entered, the height or width
is determined by the standard font matrix.
Example • This is an example of a scalable font command:
Example • This is an example of a bitmap font command: