Specifications

ZPL Commands
^BO
78
45541L-004 Rev. A ZPL II Programming Guide 9/15/06
^BO
Aztec Bar Code Parameters
Description The ^BO command creates a two-dimensional matrix symbology made up of
square modules arranged around a bulls-eye pattern at the center.
Format ^BOa,b,c,d,e,f,g
This table identifies the parameters for this format:
Note • The Aztec bar code works with firmware V60.13.0.11A and higher.
Parameters Details
a = orientation Accepted Values:
N = normal
R = rotated
I = inverted 180 degrees
B = read from bottom up, 270 degrees
Default Value: current ^FW value
b = magnification
factor
Accepted Values: 1 to 10
Default Value:
1 on 150 dpi printers
2 on 200 dpi printers
3 on 300 dpi printers
6 on 600 dpi printers
c = extended channel
interpretation
code indicator
Accepted Values:
Y = if data contains ECICs
N = if data does not contain ECICs.
Default Value:
N
d
= error control and
symbol size/type
indicator
Accepted Values:
0 = default error correction level
01 to 99 = error correction percentage (minimum)
101 to 104 = 1 to 4-layer compact symbol
201 to 232 = 1 to 32-layer full-range symbol
300 = a simple Aztec “Rune”
Default Value: 0
e = menu symbol
indicator
Accepted Values:
Y = if this symbol is to be a menu (bar code reader
initialization) symbol
N = if it is not a menu symbol
Default Value: N