Specifications

10/26/2010 KR203 Hardware Integrator Guide P1028247-001 Rev. B
6
Accessories
Accessories Overview
The KR203 printer has a wide range of accessories designed and tested to work with your
printer. The accessories can be used by themselves, combined with other printer
accessories, or as part of your own unique printer integration design. Some of the
accessories are available for your printer include:
• Nozzle Bezel — A translucent media exit bezel styled after common credit card
input bezels used in ATM machines and other kiosks.
• Quick-Fit Printer Mounting — A quick printer release mounting system that can be
used with KR203 mounting accessories or with your own design. The service tech
can pull the leaf spring (latch) to unlock the printer and quickly slide it out for easy
replacement or service. the parts can be ordered separately as:
• Quick-Fit Hubs — Flanged hubs and printer mounting screws
• Leaf Spring Retainer — Spring and two M3 x 3 mm screws
• Wall Mount Roll Holder — The wall mount supports a maximum media roll
diameter of 150 mm. The wall mounting bracket attaches at the front of the printer
flush to the kiosk wall.
• Roll Support — A rugged media roll support bracket designed to provide minimal
friction and self centering of the media roll.
• Media Roll Low Sensor — Optical sensor designed to mount into the Roll Support
accessory or other KR203 printer mounting accessory and plug directly into the
rear of the printer.
• Small Core Media Roll Adapter — Designed to guide the leading edge of receipt
into the input of the media present rollers. Allows the use of media roll inside
diameters less than 25 mm (typically POS media) and increases the operational
range of printer in a given mounting orientation (see "Printer Mounting" on page
16).