Specifications

49
Accessories
Roll Support
10/26/2010 KR203 Hardware Integrator Guide P1028247-001 Rev. B
Roll Support
The roll support is designed (and tested) to mount to a sheet metal wall 1.5 mm thick for
media rolls up to 250 mm O.D. (Outer Diameter) with media roll cores of 25.4 mm I.D.
(Inner Diameter). The wider media roll widths (80 and 82.5mm) fit to the larger offsets,
while the narrow media widths (58 and 60mm) fit to the narrow offset.
The roll support can also accommodate the media roll low sensor.
C
C
3
Roll Core ID
20
Roll Core ID
Media Widths
58 & 60
Media Widths
80 & 82.5
(used for Media Low Sensor mounting)