Symbol LS7808 Horizontal Slot Scanner Quick Reference Guide
Symbol LS7808 Horizontal Slot Scanner © 2007-2010 MOTOROLA, INC. All rights reserved. Motorola reserves the right to make changes to any product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
Quick Reference Guide 3 Introduction This guide is designed to assist during routine LS7808 operation. Detailed information about unpacking, installation, performance specifications, programming and troubleshooting can be found in the LS7808 Product Reference Guide (p/n 72E-73952-XX). Product Description The Symbol LS7808 horizontal slot scanner is a high performance, omni-directional scanner that supports high throughput applications at the point of sale (POS).
Symbol LS7808 Horizontal Slot Scanner Operating the Scanner Parts LED Indicator Connector Cover (Connector Ports behind Connector Cover) Bucket Speaker Power The LS7808 does not have an on/off switch. It is ready to scan when connected to a power supply. Indicator Lights The scanner employs an LED with a combination of red and green lights to indicate operation and decode status. See LED Definitions on page 10 for the different light combinations and their meanings.
Quick Reference Guide 5 Sleep Mode The scanner automatically enters Sleep mode when it has been inactive for a specified length of time. The scanner has two levels of sleep: laser and motor. In laser sleep mode, after ten seconds of inactivity the laser pulses at a 50% rate, and then drops to 3% after a specified time. In motor sleep mode, the scanner is programmed to turn off the motor and the laser. To wake the scanner from sleep mode, present a bar code at the scanner window.
Symbol LS7808 Horizontal Slot Scanner Routing the Cables The scanner case has several channels to route the outgoing cables so that they are organized and don’t hinder the scanner’s placement. After placing the cable connectors in the appropriate scanner ports, route the cables through the nearest channel. For a cable with a Y-connector (containing both power and interface connectors): 1. Connect the power and interface cables to the appropriate ports. 2.
Quick Reference Guide 7 Scanning Bar Codes Install and program the scanner. Refer to the LS7808 Product Reference Guide for programming instructions. For assistance, contact the local supplier or Motorola Enterprise Mobility Support (see details on the back cover). To scan a bar code: 1. Ensure all cable connections are secure. 2. Orient the item with the bar code facing the scanner window. 3.
Symbol LS7808 Horizontal Slot Scanner Active Scan Area The active scan area, in front of the scanner window, is optimized to scan items as they move in the direction of the scan arrow. The dotted areas below represent the active scan area. Scanner Window Beeper Definitions The scanner communicates with the user by emitting different beeper sequences and patterns. See the Beeper Indications table below for beeper sequences that occur during both normal scanning and while programming the scanner.
Quick Reference Guide Beeper Sequence 9 Indication Code 39 Buffering High-low beep New Code 39 data was entered into the buffer. 3 long high beeps Code 39 buffer is full. Low-high-low beeps The Code 39 buffer was erased or there was an attempt to clear or transmit an empty buffer. Low-high beeps A successful transmission of buffered data. Host Specific USB only 4 short high beeps Scanner has not completed initialization. Wait several seconds and scan again.
Symbol LS7808 Horizontal Slot Scanner LED Definitions In addition to beeper sequences, the scanner communicates with the user via an LED display. The Standard LED Definitions table defines LED indications that display during scanning. LED Indication Off No power is applied to the scanner. Green The scanner is on and ready to scan. Momentary flash A bar code was successfully decoded. Slow continuous red flashing, green on The scanner is in programming mode.
Quick Reference Guide 11 Troubleshooting Problem The omni-line scan pattern does not display when you follow the directions for installing the host cable. Scan line(s) display, but bar code cannot be read. Bar code is decoded, but not transmitted to the host. Possible Causes Possible Solutions No power to the scanner. Ensure the host has power, and is on. If the scanner uses a separate power supply, ensure it’s connected to a working AC outlet. Power-up sequence is incorrect.
Symbol LS7808 Horizontal Slot Scanner Problem Possible Causes Possible Solutions Scanned data is incorrectly displayed on the host. Scanner is not programmed to work with the host. Check scanner host type parameters or editing options. Ensure proper host is selected. For RS-232, ensure the scanner’s communication parameters match the host’s settings. For keyboard wedge, ensure scanner is programmed with the correct country code and that the CAPS LOCK key is off. Ensure editing options (e.g.
Quick Reference Guide 13 Programming Generally, the technical person in charge of scanning customizes the scanner for the particular application using programming bar codes found in the LS7808 Product Reference Guide, p/n 72E-73952-XX. If the user is programming the scanner, consult the LS7808 Product Reference Guide for more information. Following are some frequently used programming bar codes. NOTE For additional host types, refer to the LS7808 Product Reference Guide available at http://www.motorola.
Symbol LS7808 Horizontal Slot Scanner Set Defaults NOTE When scanning the desired bar code, cover other bar code on page. Scanning this bar code sets all parameters to their factory default values. Set Defaults Host Type Selection If a Synapse cable (i.e., part number STIxx-xxxx) is used, the scanner autocoders the type of host, so there is no need to scan host type selection bar codes. If a USB interface is used, the scanner autocoders the USB and defaults to the HID keyboard interface.
Quick Reference Guide 15 Keyboard Wedge Host Type (continued) NOTE When scanning the desired bar code, cover other bar code on page.
Symbol LS7808 Horizontal Slot Scanner Keyboard Wedge Host Type (continued) NOTE When scanning the desired bar code, cover other bar code on page. NCR7 7052 Country Keyboard Types (Country Codes) Country keyboard options apply to the Keyboard Wedge interface only.
Quick Reference Guide 17 Country Keyboard Types (continued) NOTE When scanning the desired bar code, cover other bar code on page.
Symbol LS7808 Horizontal Slot Scanner Country Keyboard Types (continued) NOTE When scanning the desired bar code, cover other bar code on page.
Quick Reference Guide 19 Country Keyboard Types (continued) NOTE When scanning the desired bar code, cover other bar code on page.
Symbol LS7808 Horizontal Slot Scanner Country Keyboard Types (continued) NOTE When scanning the desired bar code, cover other bar code on page.
Quick Reference Guide 21 Country Keyboard Types (continued) NOTE When scanning the desired bar code, cover other bar code on page.
Symbol LS7808 Horizontal Slot Scanner RS-232 Host Types Standard RS-232 ICL RS-232
Quick Reference Guide RS-232 Host Types (continued) NOTE When scanning the desired bar code, cover other bar code on page.
Symbol LS7808 Horizontal Slot Scanner RS-232 Host Types (continued) NOTE When scanning the desired bar code, cover other bar code on page.
Quick Reference Guide 25 RS-232 Host Types (continued) NOTE When scanning the desired bar code, cover other bar code on page. JPOS USB Host Types NOTE When scanning the desired bar code, cover other bar code on page.
Symbol LS7808 Horizontal Slot Scanner USB Host Types (continued) NOTE When scanning the desired bar code, cover other bar code on page.
Quick Reference Guide 27 USB Host Types (continued) NOTE When scanning the desired bar code, cover other bar code on page.
Symbol LS7808 Horizontal Slot Scanner IBM 46XX Host Types (continued) NOTE When scanning the desired bar code, cover other bar code on page.
Quick Reference Guide 29 IBM 46XX Host Types (continued) NOTE When scanning the desired bar code, cover other bar code on page.
Symbol LS7808 Horizontal Slot Scanner Regulatory Information Symbol Technologies, Inc., the Enterprise Mobility business of Motorola, Inc. (“Motorola”). All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Any changes or modifications to Symbol equipment, not expressly approved by Symbol, could void the user's authority to operate the equipment.
Quick Reference Guide 31 Laser Devices COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007 AND IEC 60825-1 (Ed. 2.0), EN60825-1:2007. The laser classification is marked on one of the labels on the device. Class 1 Laser devices are not considered to be hazardous when used for their intended purpose.
Symbol LS7808 Horizontal Slot Scanner Laser Labels In accordance with IEC60825-1 and EN60825, the following information is provided to the user: ENGLISH CLASS 1 CLASS 1 LASER PRODUCT CLASS 2 LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT HEBREW DANISH / DANSK KLASSE 1 KLASSE 1 LASERPRODUKT KLASSE 2 LASERLYF KLASSE 2 LASERPRODUKT ITALIAN / ITALIANO CLASSE 1 PRODOTTO AL LASER DI CLASSE 1 CLASSE 2 LUCE LASER SE IKKE IND I STRÅLEN NON FISSARE IL RAGGIOPRODOTTO AL LASER DI CLASSE 2 DUTCH / NE
Quick Reference Guide 33 Radio Frequency Interference Requirements-FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Symbol LS7808 Horizontal Slot Scanner Waste Electrical and Electronic Equipment (WEEE) Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщат на Motorola за рециклиране. За информация относно връщането на продукти, моля отидете на адрес: http://www.motorola.com/recycling/weee. Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti Motorola k recyklaci.
Quick Reference Guide 35 Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy Motorola w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej http://www.motorola.com/recycling/weee. Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Motorola para reciclagem. Para obter informações sobre como devolver o produto, visite: http://www.motorola.com/recycling/weee.
Service Information If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Motorola Enterprise Mobility Support at: http://www.motorola.com/enterprisemobility/contactsupport For the latest version of this guide go to: http://www.motorola.com/enterprisemobility/manuals Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http://www.motorola.
