Quick Start Guide

MC2200/MC2700 Quick Start Guide
14
Setting Up the Device
To start using the device for the first time:
1. Install a micro secure digital (SD) card (optional).
2. Install a nano SIM card (optional).
3. Install hand strap (optional).
4. Install the battery.
5. Install the trigger handle (optional).
6. Charge the device.
7. Power on the device.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack.
Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD pre-
cautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
1. Remove the battery.
2. Slide the microSD card holder to the unlock position.
3. Lift the microSD card holder.
10 Camera/Flash Takes photos and videos.
Provides illumination for the camera.
11 Speaker Provides audio output for video and music playback.
12
Hand Strap Towel Bar
or
Hand Strap Mount
Provides mounting point for Hand Strap accessory.
13 Back Port
14 Alignment feature/Latch
Recess
15 Battery Standard - 3500 mAh (typical) / 3300 mAh (minimum)
PowerPrecision Lithium-ion Battery
16 Battery Release Latch Press to remove the battery.
Table 2 Back View Features (continued)
Number Item Function
MN-00xxxx-01EN_mc2200-mc2700-qsg-en.fm Page 14 Monday, August 10, 2020 2:48 PM
Draft v4