Quick Start Guide

MC2200/MC2700 Quick Start Guide
6
3. Lift the microSD card holder.
4. Insert the microSD card into the card holder door ensuring that the card slides into the holding tabs on each
side of the door.
5. Close the microSD card holder and slide into the Lock position.
6. Replace the battery. See Installing the Battery on page 8.
Installing the SIM Card
NOTE: Only use a nano SIM card. Not applicable to MC2200.
CAUTION: For proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper ESD precautions
include, but not limited to, working on an ESD mat and ensuring that the user is properly grounded.
1. Remove the battery. See Removing the Battery on page 8.
MN-004030-02EN_mc2200-mc2700-qsg-en.fm Page 6 Monday, October 5, 2020 2:12 PM
Draft v1