Quick Start Guide

MC2200/MC2700 Quick Start Guide
13
NOTE: In many cases the 90% charge provides plenty of charge for daily use.
To achieve the best fast charging results use only Zebra charging accessories and batteries. Charge batteries at room
temperature with the device in sleep mode.
Spare Battery Charging
To charge a spare battery:
1. Insert the battery into a battery charging well.
2. Gently press down on the battery to ensure proper contact.
The Spare Battery Charging LED on the cup indicates the status of the spare battery charging. The standard
battery charges from fully depleted to 90% in less than three hours.
NOTE: In many cases the 90% charge provides plenty of charge for daily use.
To achieve the best fast charging results use only Zebra charging accessories and batteries. Charge batteries at room
temperature with the device in sleep mode.
Table 4 Charging/Notification LED Charging Indicators
State Indication
Off Device is not charging. Device is not inserted correctly in the cradle
or connected to a power source. Charger/cradle is not powered.
Slow Blinking Amber (1 blink every 4
seconds)
Device is charging.
Slow Blinking Red (1 blink every 4
seconds)
Device is charging but the battery is at end of useful life.
Solid Green Charging complete.
Solid Red Charging complete but the battery is at end of useful life.
Fast Blinking Amber (2
blinks/second)
Charging error, for example:
• Temperature is too low or too high.
• Charging has gone on too long without completion (typically
eight hours).
Fast Blinking Red (2 blinks/second) Charging error but the battery is at end of useful life., for example:
• Temperature is too low or too high.
• Charging has gone on too long without completion (typically
eight hours).
Table 5 Spare Battery LED Charging Indicators
LED Indication
Solid Amber Spare battery is charging.
Solid Green Spare battery charging is complete.
MN-004030-02EN_mc2200-mc2700-qsg-en.fm Page 13 Monday, October 5, 2020 2:12 PM
Draft v1