Cleaning Instructions

Specifications
230
MC3300x Connector Pin-Out
Figure 174 I/O Connector
1-Slot USB Charge Cradle with Spare Battery Charger Technical Specifications
DataMatrix 55 5.0 in.
12.7 cm
250.0 in.
635.0 cm
15 mil Code 128 (4 in. wide)
8.0 in. *
20.3 cm *
100.0 in.
254.0 cm
NOTE: * Limited by width of bar code in field of view.
** Range is reduced under low ambient light level.
Table 39 SE4850-ER Decode Distances (Continued)
Symbol Density/ Barcode Type
Typical Working Ranges @20 Ft-Cd Minimum
Near Far
P1
P7
Table 40 I/O Connector Pin-Outs
Pin Signal Name Description
1 Ground Ground pin connected to the Cradle or USB Charge Cable ground.
2 USB ID Identification signal for USI OTG communication (USB ID) which determines
USB mode (host or device).
3 POWER_IN_CON
(9V/1.5A or 5V/2Amax)
DC Power supply from the Cradle.
4 USB PWR Power supply from USB Charging Cable.
5 USB D- USB OTG data signal negative.
6 USB D+ USB OTG data signal positive.
7 GND Ground pin connected to the Cradle or USB Charge Cable ground.
Table 41 1-Slot USB Charge Cradle with Spare Battery Charger Technical Specifications
Item Description
Dimensions Height: 104.5 mm (4.11 in.)
Width: 99.1 mm (3.90 in.)
Depth: 155.5 mm (6.12 in.)
Weight 376 g (13.26 oz)
Input Voltage 12 VDC