Users Manual

Applications
76
Unpairing a Peripheral
To unpair a Bluetooth peripheral:
1. In the Scan and Pair tab, touch Unpair for the desired peripheral to unpair.
A confirmation pop-up message appears.
2. Touch OK.
Once unpaired, a message appears indicating the peripheral has been disconnected, and the peripheral is
removed from the list.
Paging an RS6000 Ring Scanner
Use Page button to easily locate the currently connected RS6000 Ring Scanner:
1. With the RS6000 Ring Scanner connected, swipe up from the bottom of the Home screen, and touch .
NOTE: The RS6000 Ring Scanner must be within 10 m (32 ft) of the device.
2. Under the RS6000 peripheral information, touch Page to page the RS6000. The paged RS6000 beeps and
vibrates.
Figure 42 Page RS6000
To stop paging, press the scan trigger of the RS6000. On a triggerless RS6000, reset the RS6000 to stop
paging. Refer to the RS6000 User Guide.