Users Manual

101
Data Capture
The device supports data capture using:
• Imager (SE4720 2D, SE4770 2D, and SE4850-ER 2D).
• Internal Laser Scanner (SE965 1D).
• RS507/RS507X Bluetooth Hands-free imager
• RS6000 Bluetooth Ring Scanner
• DS3678 Digital Barcode Scanner.
Integrated Imager
The device with an integrated 2D imager has the following features:
• Omnidirectional reading of a variety of barcode symbologies, including the most popular linear,
postal, PDF417, Digimarc, and 2D matrix code types.
• The ability to capture and download images to a host for a variety of imaging applications.
• Advanced intuitive laser aiming cross-hair and dot aiming for easy point-and-shoot operation.
The imager uses imaging technology to take a picture of a barcode, stores the resulting image in
memory, and executes state-of-the-art software decoding algorithms to extract the barcode data from
the image.
Operational Modes
The device with an integrated imager supports two modes of operation, listed below. Activate each
mode by pressing the Scan button.
• Decode mode - The device attempts to locate and decode enabled barcodes within its field of view.
The imager remains in this mode as long as you hold the scan button, or until it decodes a barcode.
NOTE: To enable Pick List Mode, configure in DataWedge or set in an application using a API command.
• Pick List mode - Selectively decode a barcode when more than one barcode is in the device’s field
of view by moving the aiming crosshair or dot over the required barcode. Use this feature for pick
lists containing multiple barcodes and manufacturing or transport labels containing more than one
barcode type (either 1D or 2D).