Users Manual

Data Capture
104
Figure 68 Barcode Scanning – MC3300x–G
Figure 69 Bar Code Scanning – MC3300x–S
3. Press and hold the Scan button or Trigger.
The red laser aiming pattern turns on to assist in aiming.
4. Ensure the barcode is within the area formed by the cross-hairs in the aiming pattern. The aiming dot is
used for increased visibility in bright lighting conditions.
The Scan LEDs light green and a beep sounds, by default, to indicate the barcode was decoded
successfully. Note that when the device is in Pick List Mode, the device does not decode the barcode until
the center of the crosshair touches the barcode.
Figure 70 Aiming Pattern: Standard and Extended Range
Figure 71 Pick List Mode with Multiple Barcodes in Aiming Pattern: Standard and Extended Range
5. Release the scan button or Trigger.
6. The barcode content data appears in the text field.