Users Manual

Data Capture
109
Figure 82 DS3608/DS3678 Pick List Mode with Multiple Barcodes in Aiming Pattern
5. The captured data appears in the text field.
Pairing the RS507/RS507X/RS6000 Hands-Free Imager
To connect the RS507/RS507X or RS6000 imager to the device, use one of the following methods:
• Near Field Communication (NFC) (RS6000 only)
• Simple Serial Interface (SSI)
• Bluetooth Human Interface Device (HID) Mode.
Pairing Using Near Field Communication
The MC3300x provides the ability to pair the RS6000 using NFC.
1. Ensure that the RS6000 is in SSI mode. Refer to the RS6000 User Guide for more information.
2. Ensure that NFC is enabled on the MC3300x.
3. Align the NFC icon on the RS6000 with the NFC icon on the back of the MC3300x.
The Status LED blinks blue indicating that the RS6000 is attempting to establish connection with the
MC3300x. When connection is established, the Status LED turns off and the RS6000 emits a single string
of low/high beeps.
A notification appears on the MC3300x screen.
The icon appears in the Status bar.
NOTE: NFC is supported on the premium and premium + configurations of the device and only with the
RS6000.