Users Manual

Data Capture
111
Figure 84 Bluetooth HID Barcode
6. Remove the battery from the RS6000.
7. Re-install the battery into the RS6000.
8. Align the NFC icon on the RS6000 with the NFC icon on the MC3300x.
The Status LED blinks blue indicating that the RS6000 is attempting to establish connection with the
MC3300x. When connection is established, the Status LED turns off and the RS6000 emits a single string
of low/high beeps.
A notification appears on the MC3300x screen.
The icon appears in the Status bar.
Figure 85 Align NFC Antennas
The MC3300x pairs with the RS6000 and appears in the Status bar.
Pairing Using Simple Serial Interface
To pair the RS507/RS507X or RS6000 with the device using SSI.
1. Swipe up from the bottom of the Home screen and touch .
NOTE: Not all Zebra devices support NFC readers and the Tap-to-Pair feature.