Quick Start Guide

MC93XX Quick Start Guide
22
Charge Only Adapter Installation
To install the Charge Only Adapter:
1. Clean the MC9XXX cradle and contacts surface as specified with an alcohol wipe, using a back and forth
motion with your finger.
For more information about cleaning, refer to the MC93XX Mobile Computer User Guide.
Figure 23 Clean MC9XXX Cradle Contacts and Surfaces
2. Peel and remove the adhesive from the back of the adapter.
Figure 24 Peel and Remove Adhesive
3. Insert the adapter into the MC9XXX cradle and adhere to the bottom of the cradle.
Clean Cradle Contacts and Surface
Peel and Remove Adhesive