Quick Start Guide

MC93XX Quick Start Guide
24
Scanning
The MC93XX offers the following data capture options:
• SE4750-SR 1D/22D imager
• SE4850-ER 1D/2D imager
• SE965 1D laser scanner
Refer to the MC93XX Mobile Computer User Guide for additional scanning options.
Barcode Capture with Imager
To capture barcode data:
1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
2. Point the top of the device at a barcode.
3. Press and hold the Scan button or trigger.
The red laser aiming pattern turns on to assist in aiming.
4. Ensure the barcode is within the area formed by the cross-hairs in the aiming pattern. The aiming dot is used
for increased visibility in bright lighting conditions.
The Scan LEDs light green and a beep sounds, by default, to indicate the barcode was decoded successfully.
Note that when the device is in Pick List Mode, the device does not decode the barcode until the center of the
crosshair touches the barcode.
Figure 27 Aiming Pattern: Standard and Extended Range
Figure 28 Pick List Mode with Multiple Barcodes in Aiming Pattern: Standard and Extended Range
5. Release the Scan button or trigger.
6. The barcode content data appears in the text field.
Barcode Capture with Laser Scanner
To capture barcode data:
1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
2. Point the top of the device at a barcode.