Quick Start Guide

MC93XX Quick Start Guide
6
Setup
To start using the device for the first time:
• Install a microSD card (optional)
• Install the battery
• Charge the device
• Power on the device.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the keypad module.
Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precau-
tions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
1. Using a Torx T8 screwdriver, remove the two keypad latch screws from inside the battery slot.
Figure 3 Remove Keypad Latch Screws
16 Scanner Exit
Window
Provides data capture using the scanner/imager.
17 Camera Flash Provides illumination for the camera.
NOTE: Camera is available only on some configurations.
18 NFC Antenna Provides communication with other NFC-enabled devices.
NOTE: NFC antenna is available only on the premium configurations.
19 Rear Camera Takes photos and videos.
NOTE: The rear camera is available only on the premium configurations.
Table 2 MC93XX Features - Back View (continued)
Number Item Function
Keypad Latch Screws