User`s manual

OPERATION
6
The following shows the function of the switch and indicators found on P520i
Printers that use Ethernet Computer Interfaces.
Press the Ethernet Push button with the printer ON to to get a Test Card.
Press and hold the Switch while turning ON the Printer to perform a RESET.
TCP/IP
ENABLED STATUS 101.2.228 ADDRESS 255.225.25.0 SUBNET MASK 10.1.2.1 DEFAULT GATEWAY Enabled TIMEOUT GATEWAY
NETWARE
ENABLED STATUS Unknown FRAME FORMAT Unknown MODE
GENERAL
2159748 SERIAL NUMBER 00074D20F484 HARDWARE ADDRESS 8.00 (3133A FIRMWARE (DATE CODE)
ERROR
None GENERAL None TCP/IP None NETWARE
JET ADMIN
ENABLED STATUS
PORT CONFIGURATION
PORT NAME
Online PRINTER STATUS Enabled BIDIRECTIONAL
CONNECTED TO
None ERROR
ZebraNet Print Server Confiruration
FIRMWARE IS COPYRIGHTED
LED Action Status Being Signaled
Red Flashing Power-On Self Testing
Red Solid > 30 sec Failure of Power-On Tests
Red/Green Flashing Alternately Firmware Download mode
Green Solid > 30 sec Proper Hardware Operation; Network Found
Green Rapid Flashing (9/sec) Network not Found
Green Slowly Flashing (1/sec) Print Job in Progress
Ethernet Test Card
LEDs
Ethernet Push
Button
Ethernet Indicators
Ethernet Push Button