User`s manual

OPERATION

2 • 3 Loading Lamination Patch

The P520i Printer requires approved patches (see Appendix C).

Clear patches, hologram patches or Overlay varnishes are specifically designed for

your P520i Printer. For optimum performance and printer life (Laminator), always use

approved patches.

1 • Remove patch from packaging.

2 • With printer power ON and printer Ready status,

open cover.

3 • Press down on the Laminator Unlock Lever to

open the laminator bracket. The laminator bracket

will pop open.

4 • Load patch onto the supply spindle “1”

(under laminator bracket) and align the notch of the

empty core with the spindle screw ( with tape

attached) onto the take-up spindle “2” .

Make sure the patch comes off the top of the supply

spindle and feeds to the top of the take-up spindle.

5 • Push down on the Laminator Lock Lever until an

audible “click” signals the locked-down position.

6 • Close Cover

.Please note that the ribbon automatically

synchronises whenever the laminator head

lock down occurs.