User`s manual

FOREWORD
This manual contains installation and operation information for the P520i Series card
printers manufactured by Zebra Technologies Corporation.
RETURN MATERIALS AUTHORIZATION
Before returning any equipment to Zebra Technologies Corporation for in-warranty or
out-of-warranty repair, contact Repair Administration for a Return Materials
Authorization (RMA) number. Repack the equipment in the original packing material
and mark the RMA number clearly on the outside. Ship the equipment, freight prepaid,
to the address listed below:
For USA and Latin America:
Zebra Technologies Corporation
Card Imaging Division
1001 Flynn Road
Camarillo, CA. 93021-8706.USA
Phone: [phone]
FAX: [phone]
For Europe, Asia and Pacific:
EMEA Technical Support
Gordon Road
High Wycombe Bucks
HP13-6EQ UK
Phone: + 44 (0) 870 241 1527
FAX: + 44 (0) 870 241 0765
COPYRIGHT NOTICE
This document contains information proprietary to Zebra Technologies Corporation.
This document and the information contained within are Copyrighted by Zebra
Technologies Corporation and may not be duplicated in full or in part by any person
without written approval from Zebra. While every effort has been made to keep the
information contained within current and accurate as of the date of publication, no
guarantee is given that the document is error-free or that it is accurate with regard to
any specification. Zebra reserves the right to make changes, for the purpose of
product improvement, at any time.
TRADEMARKS
P520i is a service mark and Zebra is a registered trademark of Zebra Technologies
Corporation. Windows and MS.DOS are registered trademarks of Microsoft Corp. All
other trademarks or registered trademarks are marks of their respective holders.
iii
iii