User`s manual

CLEANING

3 • Remove Cleaning Roller from Cartridge and dis-

card.

4 • Install new Cleaning Roller into Cartridge*. To

avoid contamination, always hold the Cleaning

Roller assembly by the ends.

5 • Carefully peel off wrapper from new Cleaning

Roller while in Cartridge.

6 • Replace Cartridge into printer. Make sure the

arrow on top of the assembly is facing towards the

rear of the printer. Hook assembly into slot on prin-

ter and rotate down. Ensure the assembly locks in

place.

DO NOT touch the roller surface that contacts the

cards.

7 • Close Cover

¨See Appendix C for replacement Cleaning Rollers.

Although the CLEANING PRINTER message is

displayed until maintenance has been performed,

the printer will cotinue to operate.