User`s manual

PRINTING A SAMPLE CARD
36
SCREEN MESSAGE
COVER OPEN
HEAD OPEN
OUT OF RIBBON
OUT OF CARD
MECHANICAL ERROR
COMMAND ERROR
NO ACCESS
ROTATION ERROR
RIBBON FAILURE
TEMPERATURE ERR
FLASH ERROR
MEANING
The cover is open.
The Laminator Head is rai-
sed.
The Laminator has run out
of ribbon.
There is no card in the
Laminator.
An error occured while
moving a card.
The Laminator has received
an invalid Command or
Parameter.
Laminator access is restric-
ted.
A Laminator Flip-over error
occured.
The film is glued to the card
during the cool-down per-
iod
Lamination Temperature fai-
lure.
Laminator Flash Memory
produced an error,
ACTION
Close cover.
Latch down the Lamination
Head.
Load a new ribbon
Check for a jamed card.
Ensure the card is not out of
specification.
Produce an initialization by
switching Printer Off and On.
Check then resend
Command.
Check for Card Jam.
Open Laminator Bracket,
remove card, and close
Bracket. Check Lot Code of
the Lamination Ribbon roll.
TROUBLESHOOTING
D • Laminating Station Alert Messages