User guide

2
Introduction
Getting Started
Using the
Printer
Troubleshooting
Accessories
Contact Us
QL Plus Series Quick Start Guide
Install the Battery
Charge the Battery
Using the LI72 Single Charger
Insert the plug from the charger cable into the battery
pack’s charger jack. Plug the charger into the A.C. outlet.
The light on the front of the charger will indicate the bat-
tery pack’s charge status.
Consult the QL Plus User’s Guide available at
www.zebra.com/manuals for complete information on us-
ing the various versions of the Model LI72 Single Charger.
Batteries are shipped uncharged. Remove protective
shrink-wrap and labels from new battery packs and
allow them to charge completely prior to initial use.
Do not charge the battery while using the printer!
Charge the battery pack when removed from the
Printer for best results.
Section Continues
LI72 Single Battery
Charger
Charger Jack
Battery
Pack
QL 420 Battery
Rotate the Belt Clip out of
the way of the Battery
Rotate the Belt Clip out of
the way of the Battery
QL 220/ 320 Battery