User Manual

Quick Reference Guide 9
Maintaining the Charger
The Charger is well constructed and durable; however, it is a precision electronic
device and must be treated as such.
Follow the procedures in this section to ensure reliable service.
Operating Conditions for the Charger
The Charger is designed to operate in environments that are normally free of dust,
dirt, and moisture. It can be operated at temperatures between +32°F (0°C) and
+104°F (+40°C).
Handling the Charger
• Do not attempt to open the Charger. No user-serviceable parts are inside.
• Charge only Lithium-ion batteries that have been designed for use in a RS507
Hans-free Imager. Do not attempt to recharge other types of rechargeable
batteries or any type of primary batteries.
• Do not place objects other than RS507 Hans-free Imager batteries inside the
Charger.
• Protect the Charger from excessive heat, cold, moisture, and harsh, dirty
environments.
• Do not leave the Charger where moisture will condense on it.
Cleaning.
The gold plated battery contacts do not tarnish or oxidize. No maintenance should
be needed. If the contacts need to be cleaned:
1. Remove power from the Charger.
2. Wet the tip of a cotton swab with isopropyl alcohol and squeeze the excess
alcohol from the swab.
3. Wipe the metal contacts with the damp swab.
CAUTION Do not pour, spray, or spill any liquid on the Charger.
72-11589-01.book Page 9 Monday, October 19, 2009 9:22 AM