User guide

SGD Commands for Wireless Operation
ip.telnet.enable
158
14143L-005 Rev. A Wireless User Guide 4/29/08
ip.telnet.enable
Description This printer setting refers to the TELNET (port 23) protocol.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the TELNET status.
Format: ! U1 getvar "ip.telnet.enable"
setvar
This command instructs the printer to turn TELNET on or off.
Format: ! U1 setvar "ip.telnet.enable" "value"
Va lues :
"off" = disables telnet protocol
"on" = enables telnet protocol
Default: "on"
Example • This setvar example shows the value set to "on".
! U1 setvar "ip.telnet.enable" "on"
When the setvar value is set to "on", the getvar result is "on".