User Manual
Table Of Contents
- Terms of Use
- Publication Date
- About
- Contents
- Introduction
- Printer Features
- Controls and Indicators
- Setup
- Printer Setup Overview
- Select a Location for the Printer
- Attaching Power
- Getting Ready to Print
- Loading Roll Media
- Run a SmartCal Media Calibration
- Test Printing with the Configuration Report
- Detecting a Media Out Condition
- Connecting your Printer to a Computer
- Wi-Fi and Bluetooth Classic Wireless Connectivity Option
- Setup for Windows® OS
- Print Operations
- Maintenance
- Troubleshooting
- Interface Connector Wiring
- Dimensions
- Media
- ZPL Configuration
Setup
28
5. Flip the media up and align the movable media sensor for your media type.
• For continuous roll receipt type media or label media without black marks or notches, align
the media to the default center position.
• For black mark (black line, notches or holes) backed media, adjust the sensor position so
the sensor aligns to the center of the black mark. Avoid the center area of the media to only use
black mark sensing for operation with black marks.
Off Center
Black Mark Sensing Only
Default - Web (Gap) Sensing
Standard Operating Position