User Manual
Table Of Contents
- Contents
- About This Document
- Printer Overview
- Using the Printer
- Preparing the Battery for Use
- Operator Controls
- Printer Status Icons
- Buttons
- Power Saving Features
- Verify That the Printer is Working
- Connecting the Printer
- Zebra Setup Utilities
- Wireless Communications with Bluetooth
- Bluetooth (BT) Security Modes
- WLAN Overview
- Setting Up the Software
- Designing Labels
- Near Field Communication (NFC)
- Wearing the Printer
- Preventive Maintenance
- Troubleshooting
- Specifications
- Miscellaneous
17
Using the Printer
Preparing the Battery for Use
Installing/Removing Battery and Battery Tape Insulator
IMPORTANT: Batteries are shipped in sleep mode to preserve their maximum capacity while in storage
prior to initial use. The battery needs an initial charging to wake it up before using for the first time. (See
Charging the Battery on page 21.)
Removing the Battery
1. If a belt clip is present on the bottom of the printer, rotate it such that it provides clearance for the
battery.
2. Depress the latch on the battery pack (Figure 5).
Figure 5 Battery Latch