User Manual
Table Of Contents
- Contents
- About This Document
- Printer Overview
- Using the Printer
- Preparing the Battery for Use
- Operator Controls
- Printer Status Icons
- Buttons
- Power Saving Features
- Verify That the Printer is Working
- Connecting the Printer
- Zebra Setup Utilities
- Wireless Communications with Bluetooth
- Bluetooth (BT) Security Modes
- WLAN Overview
- Setting Up the Software
- Designing Labels
- Near Field Communication (NFC)
- Wearing the Printer
- Preventive Maintenance
- Troubleshooting
- Specifications
- Miscellaneous
Using the Printer
18
3.
Rotate the battery pack forward and lift it up and out of the battery well (Figure 6).
Figure 6 Removing Battery
Removing the Battery Tape Insulator
CAUTION: The battery can explode, leak or catch fire if improperly charged or exposed to high
temperature. Do not disassemble, crush, puncture, short external contacts or dispose of in fire or water.
Charge on a Zebra approved Lithium-Ion charger only.
1. Pull up on the tape insulator tab located on the bottom of the battery pack.
2. Peel back the tape insulator and remove it from the top of the battery pack. Discard upon removal.
Figure 7 Removing Battery Tape Insulator