User Manual
Table Of Contents
- Contents
- About This Document
- Printer Overview
- Using the Printer
- Preparing the Battery for Use
- Operator Controls
- Printer Status Icons
- Buttons
- Power Saving Features
- Verify That the Printer is Working
- Connecting the Printer
- Zebra Setup Utilities
- Wireless Communications with Bluetooth
- Bluetooth (BT) Security Modes
- WLAN Overview
- Setting Up the Software
- Designing Labels
- Near Field Communication (NFC)
- Wearing the Printer
- Preventive Maintenance
- Troubleshooting
- Specifications
- Miscellaneous
Specifications
58
Label Specifications
NOTE: Customers who want to use the 12.5 mm (0.5 in.) core size will be required to uninstall the media
disks and install new media support disks.
Parameter ZQ521 ZQ511
Media Width 51 mm (2.0 in.) to
113 mm (4.45 in.) +1 mm
35 mm (1.37 in.) to
80 mm (3.15 in.) +1
mm
Media Length 12.5 mm
(0.5) minimum
Same
Black Bar Sensor to
Printhead Burnline
Distance
15.87 mm (0.62 in.) +/-
0.635 mm (0.025 in.)
Same
Media Thickness
(except Tag)
2.3 to 6.5 mils
(0.05842to 0.1651 mm)
Same
Max Tag Thickness 2.3 to 5.5 mils
(0.05842 to 0.1397 mm)
Same
Max Label Roll Outer
Diameter
57 mm (2.24 in.) 51 mm (2.0 in.)
Inner Core
Diameters**
19 mm (0.75 in.) standard
12.5 mm (0.5 in.) optional*
Same
Black Mark Location The reflective media black marks should be centered
on media roll
Same
Black Mark
Dimensions
Minimum mark width: 12,7 mm (0.5 in.) perpendicular
to inside edge of media, centered within the width of
the roll.
Mark length: 2.4-11 mm (0.09 to 0.43 in.) parallel to
inside edge of media.)
Same