Owner`s manual

3. Quick reference
Front Panel
(1) POWER LED (green), lights when unit is connected to mains supply
Channel 1
(2) Crossover frequency selector switch
(3) Lowpass SIGNAL LED (green), signalizes incoming signal
(4) Lowpass LIMIT LED (red), indicates when lowpass signal reaches limiter threshold
(5) Lowpass GAIN control
(6) Lowpass PHASE control
(7) Highpass SIGNAL LED (green), signalizes incoming signal
(8) Highpass LIMIT LED (red), indicates when highpass signal reaches limiter threshold
(9) Highpass GAIN control
(10) Highpass PHASE LED (yellow), signalizes activated highpass phase inversion
(11) Highpass PHASE switch
Channel 2
(12) Crossover frequency selector switch
(13) Lowpass SIGNAL LED (green), signalizes incoming signal
(14) Lowpass LIMIT LED (red), indicates when lowpass signal reaches limiter threshold
(15) Lowpass LEVEL control
(16) Lowpass PHASE control
(17) Highpass SIGNAL LED (green), signalizes incoming signal
(18) Highpass LIMIT LED (red), indicates when highpass signal reaches limiter threshold
(19) Highpass GAIN control
(20) Highpass PHASE LED (yellow), signalizes activated highpass phase inversion
(21) Highpass PHASE switch
Sub-Bass
(22) Sub-Bass gain control
(23) Sub-Bass LIN PHASE LED (yellow), indicates activated phase correction
(24) Sub-Bass LIN PHASE switch
(25) EQ board ACTIVE LED (yellow), signalizes built-in EQ board
Back Panel
(1) Mains connector (5) Highpass outputs, channel 1
(2) Sub-Bass outputs (6) Lowpass outputs, channel 1
(3) Highpass outputs, channel 2 (7) Channel 2 inputs
(4) Lowpass outputs, channel 2 (8) Channel 1 inputs
CCR 24
R
1 2 3 4
5 6
7 8
9 11
10 12
19
20
21 22
23
24
2513 14
15 16
17 18
1 2 3 4 5 6 7 8
8